Differences

This shows you the differences between two versions of the page.

--- lehrkraefte:sbt:informatik-glf2-22:robotik [2022/11/25 19:33]
Olaf Schnürer [See also]
+++ lehrkraefte:sbt:informatik-glf2-22:robotik [2023/01/27 14:17] (current)
Olaf Schnürer [Your first robotics program]
@@ Line 1: / Line 1: @@
+~~NOTOC~~
 ====== Robotik mit EV3 ======
 ===== Installation MicroPython auf EV3 ====
@@ Line 10: / Line 11: @@
       * Select "tech-lab" as network (by scrolling through the list).
       * If "Status: Online" or Status: Connected" appears, everything is fine.
-        * Else:
+      * Else:
-          * Select "Connect".
+        * Select "Connect".
-          * Press enter key in empty password field.
+        * Press enter key in empty password field.
-          * Enter password "tech-lab"! (Use arrow keys and enter key to select characters, use Escape key for deleting).
+        * Enter password "tech-lab"! (Use arrow keys and enter key to select characters, use Escape key for deleting)          * Finish with OK/enter.
-          * Finish with OK/enter.
+        * Select "Accept".
-          * Select "Accept".
+      * go back with "ESC" to main menu
-      * go back with "ESC" to mainmenu
 ===== In VS Code =====
@@ Line 23: / Line 23: @@
   * Make sure to be connected to "tech-lab" by WLAN.
   * Open the command palette (Ctrl+Shift+p). Enter "ev3dev" and choose "ev3dev: Connect to a device".
-  * Enter IP address as name.
+  * Enter IP address as name (click "I don't see my device").
   * Enter IP address.
   * Switch to Explorer panel (on left side of VS Code).
@@ Line 33: / Line 33: @@
 (using micropython = small version of python)
-  * New lego icon on left side. Choose to open new project or explore example projects.
+  * New lego icon on left side. Click on the icon and choose to open new project or explore example projects.
+  * e.g. open example project, see screenshot for sending to device ACHTUNG: EINFACHER WOHL DIREKT Ctrl+F5, LÄDT WOHL AUCH HOCH.
+{{:lehrkraefte:sbt:informatik-glf2-22:roboter-send-to-device.png?200|}}
+  * start by clicking on program, e.g. on ''main.py'' in screenshot
+{{:lehrkraefte:sbt:informatik-glf2-22:roboter-starten-von-vscode.png?200|}}
   * Can run program autonomously from robot: Press "Escape" several times, "File browser" etc.